Residential Strip Outs
Internal Strip Out & Demolition Sydney
Selective internal strip outs and demolition back to structure — linings, ceilings, partitions, joinery and finishes removed while the building shell stays intact.
- Lining & ceiling removal
- Partition & non-structural wall removal
- Floor covering removal
Free quote
Get a free quote
Tell us what needs to come out, where the job is and how we can access the space. Clear photos help Mick quote it properly.
Call Mick 0424 944 944Internal Strip Out & Demolition
Interiors Stripped Back to Structure
An internal strip out removes the interior elements of a building — wall and ceiling linings, partitions, floor coverings, joinery, fixtures and fittings — while the structural shell stays standing. It is the controlled middle ground between a renovation tidy-up and full demolition, and it is core work for Master Strip Outs across Sydney.
The work is selective by design. Plasterboard and hardset linings come off the frame, suspended ceilings and cornices come down, tiles, timber and carpet come up, and built-in cabinetry is cut out — but load-bearing elements, retained services and any finishes you want kept are identified at inspection and protected throughout. Non-structural wall removal can be included in the same visit; anything structural is done separately to an engineer’s specification with proper propping.
Service Inclusions
Internal Strip Out & Demolition Scope
01Internal Strip Out & Demolition Scope
Lining & Ceiling Removal
Plasterboard, hardset, lath-and-plaster and suspended ceilings removed back to the frame, with fixings pulled and the structure left clean.
Partition & Non-Structural Wall Removal
Stud and partition walls removed after concealed services are checked and any required licensed trade work is coordinated.
Floor Covering Removal
Tiles, timber, vinyl and carpet lifted with dust-minimised equipment, adhesive ground back and the substrate prepared for new flooring.
02What internal strip out & demolition work needs
Protection around the renovation
Retained floors, rooms and access paths are identified before removal starts, particularly when other parts of the property remain occupied or finished.
Access matched to the property
Stairs, lifts, parking, carrying distances and bin positions are reviewed before pricing so material can move out without compromising shared areas.
Services checked before removal
Any plumbing, electrical or specialist work affected by the strip out is identified and coordinated with an appropriately licensed trade when required.
Recent Projects
Internal Strip Out & Demolition project examples
Residential strip outResidential house strip out to framingWe removed wall and ceiling linings through the hallway and adjoining rooms of this Sydney home. The timber framing was exposed while the floorboards and room openings stayed in place.View project
Partial demolitionPartition walls removed and beams installedWe removed selected internal partitions and ceiling linings to open these residential rooms, then installed beams across the new spans. The timber floors and surrounding rooms stayed in place.View project
Partial demolitionPartial demolition projectWe carried out selected demolition through a narrow rear and side passage at this Sydney property. The area was cleared between the walls, fencing and neighbouring buildings that stayed in place.View projectHow It Works
How Internal Strip Out & Demolition Works
- 01
Inspection & Scope
We inspect the interior, agree which linings, finishes and fixtures are going, and flag structural elements or suspect materials before issuing the quote.
- 02
Make Safe & Protect
Any required licensed service work is coordinated, retained finishes and structural elements are protected, and dust barriers separate the work zones.
- 03
Selective Strip Out
Fixtures and joinery come out first, then finishes and linings are stripped back to structure in a planned sequence that keeps the shell intact.
- 04
Clear, Clean & Hand Over
Waste is sorted and removed, protruding fixings are pulled, and the stripped interior is swept broom-clean and walked through with you or your builder.
Your quote
What shapes an internal strip out & demolition quote
Removal scope
The rooms, fixtures, finishes and structural boundaries included in the work are confirmed before pricing.
Access and material movement
Parking, stairs, lifts, loading areas, carry distance and available bin or truck access affect the removal method.
Waste type and volume
Material mix, weight, recycling options and the likely number of loads all affect the quote.
Occupied areas and protection
The protection route, separation from lived-in areas and finishes that must remain all affect labour and setup.
Related Services
Other services for your project
FAQs
Internal Strip Out & Demolition FAQs
What exactly is involved in an internal strip out?
An internal strip out removes the interior fit out and finishes of a building — wall and ceiling linings, partitions, floor coverings, joinery, fixtures and fittings — while the structural shell remains standing. The scope is agreed room by room at inspection, so you can strip everything back to the frame or keep specific finishes and features in place.
How long does an internal strip out take?
Internal strip out timing depends on how many rooms are included, access, services, retained finishes and the amount of material coming out. We confirm the programme in your written quote so follow-on trades can be booked with confidence.
Can you remove structural or load-bearing walls?
Structural elements need an engineer’s design and the required approvals before they can be altered. We remove non-structural partitions as part of the strip out, and for load-bearing walls we work to your engineer’s specification with temporary propping in place — see our structural wall opening service for how that works.
Do I need council approval for internal strip out work?
Internal, non-structural strip outs generally do not need council approval in NSW. If your project also involves structural changes or alterations that affect the building’s external form, those works may require a CDC or DA — a private certifier can confirm the approval path before your renovation programme is locked in.
What happens to the waste?
We sort everything on site — metal, timber, plasterboard and mixed debris — and cart it to appropriate facilities, recycling where accepted. Agreed disposal is included in your quote and the work area is handed over broom-clean.
Internal Strip Out & Demolition quote planning
Planning an Internal Strip Out?
Send photos of the interior, access and what needs to come out for a free quote.