Skip to main content

Apartment Strip Out · Milsons Point

Apartment Strip Out Milsons Point

Full apartment strip outs in Milsons Point harbourside buildings — strata rules, lift protection and building hours handled by the team that stripped a Milsons Point apartment back to structure.

  • Completed Milsons Point Project
  • Licensed & Insured
  • Strata-Compliant Work Practices
  • Free Quotes in 24 Hours

Get your free quote

Tell us about the job — Mick replies within 24 hours.

Photos of the space (optional, up to 5)

or drag them here

Free quotes within 24 hours — no obligation.

Apartment Strip Out Milsons Point

Apartment Strip Out in Milsons Point

North Shore service backed by a completed Milsons Point project

Master Strip Outs has completed a full apartment strip out in Milsons Point: kitchen, bathroom, floor finishes and joinery removed back to structure, with every load of waste carried out through the building under strata rules. The photo set on our project page is from that job, so you can see exactly how we leave an apartment for the renovation trades.

Milsons Point apartments sit in mid- and high-rise buildings between the Harbour Bridge and Lavender Bay, most managed by active strata committees and building managers. Renovating here means bylaw approvals, lift bookings and protection, loading zone management on tight streets, and strict work-hour windows — usually weekday business hours only. We handle that coordination as part of the job: protection installed before the first hammer swings, common areas cleaned daily, and neighbours notified through the building manager.

Full apartment strip outs in buildings like these typically run $2,500-$4,500 depending on size, finishes and how far the lift and loading dock are from the front door. Bathrooms alone anchor at $600-$800 and kitchens at $800-$1,200 if you are staging the renovation room by room.

Apartment interior at Milsons Point with finishes and joinery removed

What's included

  • Proven full strip out completed in Milsons Point
  • Strata bylaws, lift bookings and protection managed
  • Work-hour windows and neighbour notification handled
  • Waste carried out and sorted for recycling

Why Choose Us

Why Choose Master Strip Outs?

Proven work in Milsons Point: Milsons Point apartment strip out

01

Licensed & Fully Insured

A licensed strip out and demolition team with full public liability insurance on every job, so your property and project are protected.

02

Serving Sydney Since 2012

Over 1,000 strip out projects completed across Greater Sydney, serving Sydney since 2012.

03

Waste Sorted & Recycled

Materials are separated on site and taken to licensed facilities, with recycling maximised and disposal documentation available on request.

04

Free Quotes Within 24 Hours

Tell us about the job and we respond within 24 hours with a clear, fixed quote — no hidden costs and no pressure.

Local Service

Apartment Strip Out Work We Handle in Milsons Point

Nearby areas serviced: Kirribilli, North Sydney, Lavender Bay, McMahons Point

01

Full Apartment Strip Outs

Kitchens, bathrooms, flooring, joinery and wall linings removed back to structure, ready for your builder — typically $2,500-$4,500.

02

Strata & Building Coordination

Bylaw requirements, insurance certificates, lift bookings and building manager liaison handled before work starts.

03

Common Area Protection

Lifts, lobbies and corridors protected and cleaned daily, with waste carried out in controlled loads.

04

Harbourside Logistics

Tight Milsons Point streets and shared loading zones managed with scheduled truck movements and quick load-outs.

Pricing

Apartment Strip Out Pricing in Milsons Point

Clear rates with no hidden costs

Full Apartment Strip Out

$2,500 - $4,500

Complete internal strip out of a typical apartment

  • Kitchen, bathroom, flooring and joinery removed
  • Building manager and strata coordination
  • Lift, lobby and common area protection
  • Waste removed within approved building hours

Partial or Multi-Unit Strip Outs

Quoted per project

Single rooms, combined units or whole-floor programmes

  • Room-level anchors: bathrooms $600-$800, kitchens $800-$1,200
  • Staged scheduling across multiple units
  • After-hours work where the building requires it
  • Free on-site quote within 24 hours

Apartment strip out pricing depends on size, finishes, lift access and building work-hour restrictions. Quotes are fixed after a free inspection.

How It Works

Our Apartment Strip Out Process in Milsons Point

From inspection to signed-off handover

01
Inspection & Strata CheckWe inspect the apartment, confirm strata and building requirements, and identify anything that needs testing before disturbance.
02
Project PlanningFixed quote, programme, lift bookings and protection plan agreed with you and the building manager.
03
Safe ExecutionThe apartment is stripped to structure within approved hours, with services capped, dust controlled and waste carried out in managed loads.
04
Broom-Clean HandoverCommon areas returned spotless, protection removed and the apartment handed to your builder ready for the new fit out.

Our Projects

Milsons Point apartment strip out

Full internal strip out of a Milsons Point apartment — kitchen, bathroom, flooring and joinery removed back to structure under strata rules.

Stripped apartment room at Milsons Point ready for the new fit out
Apartment interior at Milsons Point with finishes and joinery removed
Water-damaged balcony finishes stripped back during a residential strip out
Residential rooms stripped to structure for a builder handover in Sydney

FAQs

Apartment Strip Out Milsons Point FAQs

Common questions about apartment strip out in Milsons Point

Have you stripped apartments in Milsons Point before?

Yes. We completed a full apartment strip out in Milsons Point — kitchen, bathroom, flooring and joinery removed back to structure under the building’s strata rules, with lift protection and daily common-area cleaning. The project is photographed on our projects page.

How much does an apartment strip out cost in Milsons Point?

Full apartment strip outs typically run $2,500-$4,500 depending on apartment size, finishes and building access. Single rooms anchor at $600-$800 for bathrooms and $800-$1,200 for kitchens. We provide a fixed quote within 24 hours of a free inspection.

Do you handle the strata requirements?

Yes. We supply insurance certificates, comply with renovation bylaws, book and protect the lift, and coordinate work hours and neighbour notification through your building manager — most Milsons Point buildings restrict noisy work to weekday business hours.

How long does a Milsons Point apartment strip out take?

Most full apartment strip outs take two to four days once protection is in place. Restricted work hours and lift availability are the main variables in these buildings, and both are built into the programme we quote.

What happens to the waste in an apartment building?

Everything is carried out through the protected lift and common areas in controlled loads, staged to a scheduled truck rather than left in the loading dock. Materials are sorted and recycled where possible, and the common areas are cleaned at the end of every day.

Renovating a Milsons Point Apartment?

Call 0424 944 944 for a free inspection and a fixed strip out quote within 24 hours.

Call Mick nowFree quote